Idiomas disponibles
Idiomas disponibles
EN
Timer Function
1.
When the LCD touch screen is ON, double tap the blue area of the
screen to activate the timer. An alarm clock icon will appear on the
screen.
2.
Once the timer function has been set up, it will be reminded to
drink every 2 hours: the smart cap will beep and the light circle will
blink in different colors, according to the water temperature.
3.
Tap the smart cap to cancel the beeping
sound and switch the circle light off.
4.
The timer function will be resumed
automatically after 8 hours. Double tap
the blue area of the LCD touch screen to
cancel this function. The alarm clock icon will
disappear from the screen.
Charging your Smart Bottle
Unscrew the
smart cap.
8
Remove the waterproof
Use the USB charging
silicone ring.
cable provided.
Once the bottle is fully charged, place the silicone ring back and make
sure it is securely tight. Otherwise, leakage may occur.
Charging display
Power indicator
The battery icon will flash on the LCD touch screen when
the bottle runs out of power. Connect the device to the
charger
Charging
The battery icon shows the battery level.
Charging complete
The battery icon will show a full battery.
Expired water reminder
If you do not touch the bottle, and consequently do not drink for 10
hours, the LCD touch screen will display an "X" along with a bright
red light.
Tap the LCD touch screen to cancel this reminder and wait about 5
seconds for the bottle to return to its normal operating mode.
EN
9
