Idiomas disponibles
Idiomas disponibles
LEARNING WITH THE HIDDEN BUTTON OF A LEARNED TRANSMITTER
• The use of the hidden button, if present, of a transmitter already learned involves the entry in learning
mode of all the automations in which it is associated. Make sure that unwanted remote controls are not
learned.
• This procedure is not available for all transmitter types. Please refer to your transmitter installation manual.
When automation is stopped you can press the hidden button of a transmitter already learned to open the radio memory of the
control unit. This is equivalent to pressing the UP button on the control unit.
Then follow the learning procedure from point 3 to 5 of the previous paragraph.
CANCELLATION OF A TRANSMITTER ALREADY LEARNED BY HIDDEN BUTTON
• The use of the hidden button, if present, of a transmitter already learned involves the entry in learning
mode of all the automations in which it is associated. Make sure that unwanted remote controls are not
learned.
• This procedure is not available for all transmitter types. Please refer to your transmitter installation manual.
Make sure you are out of the programming menus.
1.
To exit, briefly press the MENU key until you see the status of the
control panel.
While the automation is stopped, press and release the UP button or
2.
the hidden button of a transmitter already learned.
The words " rad "appear on the display.
Within 10 seconds, simultaneously press the first button and the
3.
hidden button of the transmitter to be deleted.
If the cancellation is successful, the words "CLr" appear on the
4.
display.
The flashing light flashes 4 times.
After 2 seconds the display shows the location of the erased memory
5.
(for example " 235 ").
6-1622467M - rev. 1 - 07/03/2024
NOTE
NOTE
UP
SS
UP
SS
Translated from the original language - English - 19
MENU
DOWN
MENU
DOWN
