Idiomas disponibles
Idiomas disponibles
Troubleshooting
CR
de tii
di
AAA
Preliminary Steps
Cautions:
Check and take steps as described in the tables below.
e Do not use the unit if it malfunctions or is
something wrong.
e Do not use the unit in an irregutar condi-
B
tion, for example, without sound, or with
If You Suspect Something Wrong
smoke or foul smell, can cause ignition or
Immediately switch power off.
electric shock. Immediately stop using it
Disconnect the power cable and check that there is neither smoke
and call the store where you purchased it.
nor heat from the unit before asking for repairs. Never try to repair
the unit yourself because it is dangerous to do so.
Note : Refer to the operating instructions of the head unit (CY-VMC7000U) with regard to Remedy.
Common
(symptom)
Chie Remedy |
|
|
Car's engine switch is not on.
|
Turn your car's ignition switch to ACC or ON.
Cables are not correctly connected.
Connect cables correctly.
Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always live.
No power
>
Accessory cable is not correctly connected.
=>Connect the accessory cable to your car's ACC source.
Grounding wire is not correctly connected.
Connect the grounding wire to a metal part of your car.
i
Fuse is burnt.
Cali the store where you purchased the unit, or your nearest Panasonic
Servicenter (see the attached sheet) and ask for fuse replacement.
pea
E
IES
|
The volume is adjusted to zero.
«Raise the volume.
Mute is set to ON.
=$ Set it to OFF.
No sound
= Connect cables correctly.
>
Cables are not correctly connected.
The MAIN-IN is set to ON (when the digital surround processor is not connected).
Set the MAIN-IN to OFF when you do not use the MAIN-IN (when the digital
surround processor is not connected).
Condensation (dew)
= Wait for a while before use.
CA-TU7000U
53
