Idiomas disponibles
Idiomas disponibles
Aligning the wall plate
/l
aL
REAR WALL
TEMPLATE
Draw a Vertical Line on
Centerline
i
notches
y o o
oe
ee eee
¥
Wall from Center of Top
0,000
6 9..9.8
0° 0°80
0° 6 Qn
9
O° oo
0
29% 9292020902
9229%025
7020707099229 070% 0% 0° 920°
G)
f
/
Horizontal Line
Hole €
ns Sas eS Sage eaase >
Hole B
h
\
Horizontal Line
Draw a Horizontal line on wall from bottom of
"Rear Wall Template".
CAUTION: Wear gloves to avoid cutting
fingers on sharp edges.
|.
Draw a Vertical line on the wall at the center of the 30" wide space.
Draw a Horizontal line on the wall along the bottom of "Rear Wall Template".
3.
Drill 5/8" holes for toggle bolts on 3 locations (Hole A, Hole B, Hole C) but if the location of hole is same as that of
stud, drill a 3/16" hole for wood screw. In other words, toggle bolt can not be used at the location of stud.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
NOTE: Holes A, B and C are inside area E. If none of A, B and C is in a stud, find a stud somewhere in area E and draw a
forth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the
weight of the microwave. Set the mounting plate aside.
8505_XAA_03807A-EN+MES.indb
10
2010-07-08
6:52:59
