12V DC external power
The camera is equipped with an external power jack designed to accept
a barrel plug cable of DC 12V adaptor or battery pack (not supplied).
•
Make sure camera is in the OFF position.
•
Insert the barrel plug of external AC to DC power adaptor or
battery pack into the DC 12V port on the bottom of the camera
housing.
•
Slide the switch to TEST, A, B or MAN from OFF.
Memory Options
The camera is equipped with an expandable media card slot capable of
accepting up to 32GB SD card with Class 10 or below speed rating (not
supplied). The status display will show the number of images stored on
the SD card. If no SD card is inserted, the status display will indicate
"NO Sd" and the camera will not operate.
When the SD card memory capacity is full, the LCD display indicates
"FULL". The camera will stop taking images or videos.
Inserting the SD card
•
Open the cover, and insert the SD card in the SD card slot
completely and oriented correctly as shown by the icon above
the slot.
•
To remove the SD memory card, depress it and pull it out gently.
•
SD cards must be empty (no images from other sources). If the
SD card has been used in another device, please make sure to
format it in your computer before using it in your camera. New
cards are ready to use straight from the package.
NOTE: When you format a SD memory card, the operating system
erases all information and files on the card.
Camera Setup and Program
When you slide the power switch to the A, B or MAN position, the
status display shows the camera status.
This camera is equipped with 2 preset settings (A and B) and 1
Indice A
37/144