Create Warm Clear Manual De Instrucciones página 9

INSTALL ATI ON IN BAT H ROO MS
If you want to install the heater in the bathroom, take into account the following safety in-
structions for proper installation.
For protection against electric shock, only products with the appropriate IP rating may be
used. This classification indicates the distance that the product must respect a water source.
Our product achieves the IPX4 classification, so it can be installed in the areas indicated in
the following illustration.
Be sure to respect the distance with walls and objects.
WA L L I N STALL ATI ON
1. Before installing the product on the wall,
verify that the basic safety measures for
its correct installation are respected.
3. Lay the bracket level on the wall as a guide to mark the position where you will put the
hooks (make sure the holes are parallel). With a pencil mark the exact position of the holes.
ASSEMBLY INSTRUCTIONS
2. Remove the bracket from the rear that
is attached to the heater and use it as a
template to mark the holes on the wall.
E NGLI SH 9