Create Warm Clear Manual De Instrucciones página 14

Q3: Adjustable program settings
• When in P3 mode, press the mode button
• The display shows
press mode button
• The display will show
heating mode for each hour.
• Repeat the operation until you have completed the schedule for every hour and every day.
Note:
After setting the heating mode for the 23rd hour, press
the day.
When the screen shows
For example, if you set Comfort mode
be in Comfort mode between 00:00 and 00:59.
Timer function:
• Press the timer button
and to set the timer from 0 to 9 hours in one cycle. Wait 3 seconds to confirm the set-
ting. When the sleep timer function is enabled, the display shows the remaining time. Set the
timer to 0h to close this function.
Quick timer settings:
• Press once and the display will show "
timer in a continuous cycle.
Warning: The timer off function cannot be activated in antifreeze (Fr) mode.
• Open window function: press the mode button
After 3 seconds it will show the default time again (if there is a timer, it shows the remaining
time). The open window function is ready. When the item is heating up and the open window
mode is active, it detects the room temperature and the screen will show
The item pauses and stops heating.
• To exit the open window function, press
activated. Then the screen stops flickering
cally return to the previous working mode, or press
window function will be restored when the item is turned on again.
To completely disable the open windows feature: press
show , then it returns to display the default temperature after 3 seconds.
14 E NGL I SH
, press and
to confirm and enter the time setting.
, press and
, press to finish all settings.
once, the display will show "
for 3 seconds to enter the day setting.
to configure of
to set from 00 to 23h. Press
when the screen shows
" and it will keep flashing. Press
". Press once again to select the 2h, 4h, 8h
and at once. The display shows
to return to the work mode that was previously
. You can also wait 60 minutes to automati-
to enter the wait condition. The open
and
(Monday to Sunday).
to choose the
to return to the setting for
, it means that it will
and it will blink.
at once. The display will
.