Kinderkraft FINIO Manual De Uso página 17

2. To change the function of the skids, turn the legs under the skids as appropriate
(FIG. 11). Fig. 12 shows the lets in position allowing to rock the cradle. In order to
prevent the rocking, turn the legs as indicated on Fig. 13.
3. In order to secure the baby, thread the lap pelts through the crotch strap hole and
connect the buckle latches until locked (FIG. 14). Adjust the safety harness each time
to properly secure the baby. Use the plastic elements on the lap belts for adjustment.
IV. ATTACHING SKIDS TO KINDERKRAFT FINI CHAIR
1. Disassemble all the components of FINIO reclined cradle, following the stages as
provided in chapter II in reverse order. Unfasten the bottom leg components of the
Kinderkraft FINI chair, leaving the upper legs and the leg rest in place.
2. Next, take the skids and in the place of assembly of the metal rods (c) attach the
metal stoppers (j) using bolts (k).
3. Use the small spacer sleeve (l), bolt (g) and wrench (n) attach the skid to the front
leg of the FINI chair (FIG. 15). The crooked surface of the sleeve should touch the
skid, the flat side should touch the FINI chair leg. Make sure that the metal stoppers
are (j) placed on the inside of the chair.
4. Using the large spacer sleeve (m), bolt (h) and wrench (n) attach the skid to the
rear leg of the FINI chair (FIG. 16). The crooked surface of the sleeve should touch
the skid, the flat side should touch the FINI chair leg.
5. Repeat steps described in points 3 and 4 on the other side of the chair.
5. Fig. 17 shows a correctly assembled FINI chair with skids.
V. Maintenance and cleaning
Wash at max. 30°C, gentle
process.
Do not dry in a tumble dryer
Do not dry clean
Frame and skids: Metal and wooden parts should be cleaned with a soft, clean or
damp cloth with mild soap.
VI . Storage
Keep the product together with its loose parts away from children.
EN
Do not bleach
Do not iron