Bose FreeSpace DS16SE Guia De Instalacion página 32

Installation Guidelines
Manufacturer's Recommendat1ons
LOADS
- Always use product within its stated
Safe Working Load (SWL}.
LIFTING
&
MOVEMENT - Do not use for
lifting, such as in a crane or pulley situation, or
for hanging services exhibiting movement or
dynamic behavior. Designed for hanging statically
positioned services only.
INSTALLATION: Do not walk or stand on the
Gripple product installation.
PAINTING - Do not paint the Gripple fastener.
Ensure that the fastener is in its final position prior
to applying any paint to the cable assembly. Do
not move Gripple fastener after painting.
CABLE
- Always use Gripple supplied and
specified cable. Never use on coated cable or
other cable. Trim any damaged filaments with
Gripple wire cutters before use.
ENGLISH
Safe Working Load •
Size Max Load (lbs)
No. 2 100
• Hanging at Angles
If cable is suspended at
an angle from vertical, an
additional sideways load
is applied which reduces
the load capacity of the
overall suspension. Please
see published technical
information ... regarding this
net effect on Safe Working
Load.
--j
ENVIRONMENT
- Grioole products, including Stainless Steel, are NOT suitable for
use in chlorinated / swimming pool environments. Use standard Gripple hangers
in DRY LOCATIONS ONLY. Stainless Steel Gripple hangers are SUITABLE FOR
DAMP LOCATIONS.
LUBRICATION - Do not apply oil or any other lubricant to the Gripple fastener or any
other part of the cable assembly.
JOINING - Never join two cable ends together in-line. Only pass the free end of the
cable In a continuous loop through both channels of the Gripple fastener. The angle
inside the Gripple formed loop must not exceed 60°.
HANGING AT AN ANGLE TO VERTICAL - Ensure that the load calculation
considers the effect of 'side load'. For example, at an angle of 60° to vertical, the
SWL is reduced by 50%. (See published technical information on website or in
Product Guide.}
Failure to comply with these recommendat,ons may result 1n product mattunction and possible damage
to property or person and will invalidate the Gnpple warranty. Grtpple products are warranted to conform
to the manufacturer' s published speclficat,ons at the time of shipment and to be free from defects in
materials and workmanship. No other warranty, whether express or 1mphed, including any warranty of
merchantability or fitness for purpose, shall exist in connection wrth the sale or use of any Gnpple product.
Install
LOOP: For choking around bar Joists, beams, and roof trusses.
Release
Gripple No.2 Loop Hanger
IS
UL listed, File
No. E228153 and E251132'.
• EMT Conduit up to 6" diameter. Suitable for use
1n Air Handling Spaces 1n accordance with Section
300.22 (C) and (D) of the National Electrical Code,
and rules 12-010 (3), (4), and (5), and 12-020 of the
Canadian Electrical Code, Part 1 .