INSTALLATION INSTRUCTIONS
TELESCOPING ELONGATED
TOILET SEAT WITH EVERCLEAN
DECORATIVE LID CONCEALS SEAT
MODEL 5359A.050B.XXX
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure
your installation conforms to local codes.
NOTE: Pictures may not exactly depict toilet seat and components.
Side View of the toilet seat installation parts.
Hinge
Cover
Plastic
Bolt
Adjustment
Washer
Hinge
Gasket
The installation kit includes two sets of
2
adjustment washers: One set with center
holes, and one set with off-set holes. Use
the set that provides the best alignment
of the seat on the toilet bowl.
TANK
To Move Seat
Forward
FRONT OF BOWL
5
Tighten the plastic bolts using
a screwdriver.
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
© AS America, Inc. 2012
1
Hinge
Attach Hinge Gaskets to bottom of Hinge Base.
Plastic
Make sure alignment tabs on hinge gaskets
Wing Nut
match the slots under the hinge base.
3
To Move Seat
Back
Slip the plastic bolts through the
adjustments washer holes.
6
Push down the hinge covers.
®
SURFACE
Alignment
Slot
Tab
Under Hinge
Hinge Gasket
Base
4
Thread the plastic wing nuts on
to the plastic bolts.
7
Replacement Kit #255 Available:
PART NO.
DESCRIPTION
Replacement Kit #255
760087-0070A
760162-100