NEC MultiSync A500+ Manual Del Usuario página 7

Controls
OSM(On-Screen Manager) control buttons on the front of
the monitor function as follows:
EXIT
CONTROL </>
CONTROL -/+
PROCEED
RESET
ab Brightness/Contrast Controls
a BRIGHTNESS: Adjusts the overall image and background screen
brightness.
b CONTRAST: Adjusts the image brightness in relation to the
background.
de Size and Position Controls
h LEFT/RIGHT: Moves the image horizontally (left or right).
i DOWN/UP: Moves the image vertically (up or down).
f NARROW/WIDE: Decreases or increases the horizontal size of the
image.
g SHORT/TALL: Decreases or increases the vertical size of the
image.
pq Geometry Controls
The Geometry controls allow you to adjust the curvature or angle of
the sides of your display.
u IN/OUT (pincushion): Decreases or increases the curvature of
the sides either inward or outward.
r LEFT/RIGHT (pincushion balance): Decreases or increases the
curvature of the sides either to the left or right.
q TILT (parallelogram): Decreases or increases the tilt of the sides
either to the left or right.
p ALIGN (trapezoidal): Decreases or increases the bottom of the
screen to be the same as the top.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exits the OSM menu.
Moves highlighted area left/right to select one of the
controls.
Moves the bar in the - or + direction to decrease or
increase the adjustment.
Enters OSM menu and selects icons at the top of the menu.
Resets the highlighted control to the factory setting.
E - 4