Idiomas disponibles
Idiomas disponibles
Digital Thermometer/English
Operating instructions
Selecting the temperature scale
Readings are displayed in either degrees Celsius (℃), degrees
Fahrenheit (℉) or degrees Kelvin (K).When the thermometer is turned
on, it is set to the temperature scale that was in use when the
thermometer was last turned off. To change the temperature scale,
press the "℃", "℉"or "K" key.
Selecting the display resolution
The thermometer allows two choices of resolution:
High resolution: 0.1℃ or 0.1℉
Low resolution: 1℃ or 1℉
Overload display(1)
The digital display will indicate 1 when the input exceeds the
measurement range selected.
If measuring above 199.9º, change the resolution to 1º. Be certain to
seat the thermocouple connector properly and that the leads are not
broken.
Hold mode
Press the "HOLD" key to enter the Data Hold mode, the "HOLD"
annunciator is displayed. When HOLD mode is selected, the
thermometer holds the present readings and stops all further
measurements.
Press the "HOLD" key again to cancel HOLD mode and to resume taking
measurements
Max mode
Press the "MAX" key to enter the MAX mode. The thermometer then
records and updates the maximum values and the MAX annunciator
appears on the display.
4
Press the "MAX" key again to exit the MAX recording mode.
In the MAX mode, press the "HOLD" key to stop the recording, press
"HOLD" again to resume recording
Backlight mode
Press the BACKLIGHT key to turn on the LCD backlighting function. The
LCD backlighting will auto-off after the
approximately 5 seconds.
Tc (Temperature compensator) checking mode
Press and hold the "Tc" key to enter the temperature compensator-
checking mode. the thermometer will display inside temperature.
Maintenance & cleaning
1. Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
2. Periodically wipe the case with a dry cloth. Do not use abrasives or
solvents on this instrument.
Digital Thermometer/English
BACKLIGHT
key is released after
5
