MBO Merkura 1040 Instrucciones Para El Servicio página 34

Merkura 1040 GB neu
14
Time selection
Problems, possible causes and solutions
Problem
No heart rate
is displayed
Incorrect heart rate
is displayed
Display fades
Irregular figures
on the display
www.MBOservice.net
05.03.2003
TIME / DEBUGGING
Change to timer mode by pressing key "A".
A
Hours and minutes are displayed in the lower
display line while the seconds are indicated by a
rolling bar on top.
For setting the timer, see page 9.
Possible cause(s) and solutions
Transmitter belt is not positioned as it should.
The conductive pads are dirty or were not
moistened prior to use.
Atmospheric of RF interfernce.
Check or replace the battery of the transmitter.
Tighten the belt (see page 7, Fig. 4c).
The conductive pads are dirty or were not
moistened prior to use.
The elastic belt is too loose.
Weak batteries.
Tighten the belt (see page 7, Fig. 4c).
Atmospheric or RF interference.
Weak computer battery.
Replace it immediately.
Remove the computer battery and reinsert it.
16:45 Uhr Seite 14