Kohler Composed K-104C36-SANA-CP Instrucciones De Instalación página 5

1. Install the Faucet
NOTE: Before drilling the mounting hole, use the following dimensions for proper
placement:
Dimensional Requirements
Mounting Hole: 1-1/4" (32 mm) minimum to 1-1/2" (38 mm) maximum diameter.
Spout to Wall: 1-3/4" (44 mm) minimum distance between the back of the spout
and the wall.
Spout to Sink: 1-1/8" (29 mm) maximum distance between the spout base and the
edge of the sink bowl.
Install the Faucet
Determine the mounting-hole location.
Drill a hole through the mounting surface according to the surface manufacturer's
instructions.
Install the stud to the bottom of the faucet.
Install the gasket to the bottom of the faucet.
Insert the faucet, water inlet tubing, and cables through the mounting hole.
Verify that the gasket is in between the escutcheon and the sink/deck surface.
Kohler Co.
Spout
Gasket
Rubber Washer
Cables
5
Sensor
Threaded Stud
Metal Washer
Nut
Water Inlet Tubing
1561532-2-A