Kohler Composed K-104C36-SANA-CP Instrucciones De Instalación página 11

6. Install DC Power Unit
Battery Box
IMPORTANT! Verify that you are following the correct power system installation
based on your model number. For a hybrid power unit installation, refer to "Install
Hybrid Power Unit".
IMPORTANT! In the event of leaking batteries, replace the battery box and batteries.
IMPORTANT! Use care not to pinch the tube or cables when installing the cover.
IMPORTANT! The area in front of the sensor must be free of objects during the 2
minute learning cycle or the faucet may not function properly.
NOTE: Do not mix used and new batteries.
Unthread the control box screws to remove the control box cover.
Unthread the battery box screws to remove the battery box cover.
Insert four AA batteries (LR06) (provided). Refer to the battery cover for battery
orientation.
Reinstall the battery box cover and secure with the screws.
Connect the power cords.
Place the battery box into the empty space within the control box.
Secure the control box cover to the control box.
Allow 2 minutes for the sensor to cycle through the automatic sensing distance.
Kohler Co.
Power Cord
2-Pin Power
Connector
to control box
DC-DC Booster Assembly
LED
11
2-Pin Power
Molex Connector to
Battery/AC/Hybrid
Battery
1561532-2-A