Kohler K-6930 Guia De Instalacion página 8

Nipple
6. Install the Spout
Remove the temporary nipple.
Apply thread sealant to the 1/2" nipple threads on both ends.
Install a 1/2" nipple to extend 1/2" (1.3 cm) beyond the finished
wall.
Apply a bead of plumbers putty or other sealant around the inlet
of the spout according to the manufacturer's instructions.
Carefully tighten the spout with a clean strap wrench and remove
all excess putty.
Flush hot and cold water through the spout for one minute.
106966-2-AD
Apply plumbers
putty.
Spout
1/2"
(1.3 cm)
8 Kohler Co.