Filling The Water Reservoir - Domo DO7054S Manual De Instrucciones

· The steam regulator allows you to either use or not use steam:
· : ironing without steam
· : continuous low steam
· : continuous high steam
· After use, turn the temperature regulator to MIN, move the steam regulator button to the
"ironing without steam"

FILLING THE WATER RESERVOIR

· Remove the plug from the outlet.
· Set the steam regulator to ironing without steam
· Hold the iron at a slant and fill the water reservoir through
the opening. So not fill it beyond the MAX level.
· If you live in an area with hard water, it is recommended
you use 50 % tap water and 50 % demineralised or distilled
water. Do not use chemically modified water or perfumed
water.
· Never store the device with a filled water tank.
TEMPERATURE CHOICE
· Check the ironing instructions on the item of clothing that you wish to iron.
· Materials with a separate shiny layer or other extra finishings should be ironed inside out at
the lowest temperature.
· If your item of clothing consists of several fabrics, always follow the indications pertaining
to the fabric that has to be ironed at the lowest temperature. An item of clothing of, e.g.,
60% polyester and 40% cotton should be ironed at the temperature indicated for polyester
without steam.
· Sort your laundry by type of fabric and temperature at which it must be ironed. Begin
with the items of clothing for low temperatures and end with the laundry for the highest
temperature.
· If you turn the temperature down, give the appliance time to cool off.
· Wools and other delicate fabrics such as silk, velour, etc., can best be ironed with a pressing
cloth to prevent the fabric from being damaged.
Nylon
Silk
Wool
Cotton
Linen
www.domo-elektro.be
position and remove the plug from the outlet.
Nylon
Silk
Wool
Cotton
Linen
.
Figure 1
4. Make sure steam button is on dry position. (See fig 3), then plac
fig 4).
Figure 3
5. Once soleplate temperature has reached the preset temperature, i
then set steam button to your desired steam output or dry position and
WARNING: Not touch hot soleplate at any time before cooling dow
6. Press spraying water button a couple of times to moisten the lau
spraying make sure that there is enough water in water tank.
7. Steam shot function had better be used at max temperature, as it helps remov
8. The iron has an anti-drip function: if ironing garments for long time, soleplat
iron will stop coming out steam automatically and no water droplets can come o
9. "Steam shot" can also be applied when holding the iron in a vertical p
Figur
31
DO7054S