Parkside PPS 40 B3 Instrucciones De Funcionamiento Y De Seguridad página 8

Cortador de plasma
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
Eye injuries due to glare,
Touching hot parts of the device or
workpiece (burn injury),
In case of improper protection, risk of
accident and fire through sparks and
slag particles,
Harmful emissions from smoke and gases
if there is a lack of air or if closed rooms
are insufficiently extracted.
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.
• Package contents
1 plasma cutter
1 earthing cable with clamp
1 cutting cable incl. cutting burner
1 compressed air hose with Quick-Connect
3 electrodes (1 pre-mounted)
1 set of operating instructions
3 burner sleeves (1 pre-mounted)
• Parts description
NOTE!
f After unpacking the product, please
check that all of the package contents
are present and that the device is in
perfect condition. Do not use the device
if it is defective.
1
Plasma cutter
2
Handle
3
Mains plug
4
Earthing clamp
5
Earthing clamp plug
5a
Earthing clamp device plug
5b
Earthing clamp connecting plug
6
Plasma burner control plug
8
GB/IE/NI/CY/MT
7
Plasma burner plug
8
Plasma burner
8a
Plasma burner button
8b
Nozzle clamping sleeve
8c
Burner sleeve
8d
Electrode
8e
Spacer
8f
Interlock switch
9
Overheat protection indicator lamp
10
Plasma burner control socket
11
Earthing clamp connection socket
12
Plasma burner connection socket
12a
Cover cap
13
Current controller
14
Mains indicator lamp
15
Quick connector compressed air hose
16
Compressed air hose
17
On/off - switch
I switched on
O switched off
18
Condensation water tank
19
Manometer
20
Compressed air connection
21
Rotary knob to regulate the pressure
• Technical specifications
Output:
15–40 A
Input:
230 V~ 50 Hz
Weight:
approx. 5.0 kg
Dimensions:
341 × 116 x 237 mm
Insulation class:
H
Cutting
performance:
Copper:1–4 mm
Stainless steel: 1–8 mm
Aluminium:1–8 mm
Iron: 1–10 mm
Steel: 1–12 mm
Working pressure: 4–4.5 bar (4 bar preset)
Changes to technical and visual aspects of
the product may be made as part of future
developments without notice. Accordingly,
loading