Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE(CONTINUED)
Cleaning Main Burners
1.
Turn regulator/control knob to "
Note: A "poof" sound is normal as the last of the LP gas is burned.
2.
Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
3.
Remove regulator/control knob.
4.
Remove cooking grid and heat plate.
5.
Disconnect wire from igniter, if applicable.
6.
Remove burner.
7.
Remove all food residue and dirt from burner surface.
8.
Disconnect wire from spark electrode.
9. Clean inlet of burner with small bottle brush or compressed air.
10. Clean any clogged ports with a stiff wire (such as an opened paper clip).
11. Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner from manufacturer.
12. Reinstall burner. Reconnect igniter (if applicable) and regulator/control knob.
13. Replace heat plate and cooking grid.
14. Connect LP gas tank per "Installing LP Gas Tank" section.
15. Perform leak test per "Checking for Leaks" section.
Before Storing
1.
Turn LP gas tank valve to "CLOSED".
2.
Turn regulator/control knob to "
Note: A "poof" sound is normal as the last of the LP gas is burned.
3.
Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
4.
Clean all surfaces.
5.
Lightly coat the burner(s) and cooking grid with cooking oil to prevent excess rusting.
6.
If storing the grill indoors, disconnect the LP tank per "Disconnecting LP Gas Tank" section.
7.
Place the protective cap cover on the LP tank and store the tank outdoors in a well-ventilated area out of direct sunlight.
8.
If storing the grill indoors, cover the grill and store in a cool dry place.
9.
If storing the grill outdoors, cover the grill with a grill cover for protection from the weather.
OFF" .
OFF" .
16
