Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTION
WARNING:
• The installation to the mains supply must conform to the local standards and regulations.
• Improper connection may cause to an electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a
proper outlet by an qualified electrician.
• The accessibility of the power plug must be ensured to disconnect the appliance from the power
supply in case of emergency.
• Make sure that the voltage supply matches the specifications on the rating label before
connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug after installation is not accessible, a corresponding disconnect device must be
available to meet the relevant safety regulations.
CHANGING THE ORIENTATION OF THE DOOR
The door can be right or left opening. Change the door by following the instructions below. Making
this change requires 2 people.
Instructions for changing the "right-hung" door and reassembling it so it is "left-hung": (The pictures
below are for the guideline to reverse the door. The appearance of the appliance may be different
from the product you purchased.)
1. Unplug the power cord from the socket.
2. Remove the top hinge cover.
3. Unscrew the top hinge and remove it, then remove the
door by gently lifting it.
4. Unwind the front right foot completely until it comes
off. Remove it.
Unscrew the lower hinge and remove it.
5.
6. Place the lower hinge on the opposite side after
removing the front foot and attach the hinge with the
screws you have just removed from the right side.
7. Replace the foot on the left side of the appliance with
the adjustable foot removed from the right side. Screw
the smaller foot onto the right side.
44
