Idiomas disponibles
Idiomas disponibles
DISASSEMBLY INSTRUCTIONS
WARNING! always make sure the mini juicer is unplugged before starting disassembly .
1 .
Remove the pulp basket and juice pitcher .
2 . Lift the safety locking bars up and off the 2 clamp locking slots on the housing . Rest the locking bars at both
sides of the unit .
3 .
Lift mini juicer lid up and off the mini juicer .
4 . Grasping the pulp spout in one hand and the back of the juice bowl in the other, loosen and lift the juice
bowl and blade basket off as one piece . These 2 parts will then easily separate for easy cleaning .
CAUTION: Use care when handling the blade basket . Hold the basket's rim only . Do not touch the cutter
blades on the bottom of the basket . The cutter blades are very sharp!
5 . Please follow the procedures outlined in the care & cleaning instructions for specific cleaning instructions .
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance . It contains no user serviceable parts . Do not try to repair it yourself .
Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair
technician .
CARE & CLEANING INSTRUCTIONS
1 .
Unplug from outlet . Please follow the procedures outlined in the disassembly instructions to remove parts
before cleaning .
2 . Clean unit and parts after each use .
3 .
Do not immerse the motor base in water or spray it with water . Clean only by wiping with a damp sponge,
cloth, or paper towel . Use any liquid dishwashing detergent but do not use products containing ammonia or
scouring powders . These products will dull, scratch or mar the surface .
4 . If any juice has spilled under the mini juicer, clean legs and area with a lightly soaped sponge, then dry . Use a
damp toothbrush or cloth to clean juice from inside the motor hub on top of the motor base .
5 . All parts (except the blade basket and motor base) are washable in warm, soapy water or in the dishwasher .
6 . When cleaning the blade basket, make sure the tiny holes in the basket are not clogged . This can be
accomplished by holding the blade basket under running water faucet . Rub a plastic scrub pad in a circular
motion to clean the basket holes from both inside and outside of the blade basket .
CAUTION: Use care when handling the blade basket . Hold the basket's rim only . Do not touch the cutter
blades on the bottom of the basket . The cutter blades are very sharp!
NOTE: If necessary, allow the blade basket to soak in hot water with 10% lemon juice added .
7 .
The mini juicer clear cover, juice bowl, pulp basket, juice pitcher and juice pitcher lid may be washed in
the top rack of a dishwasher . However, washing with warm (not hot) tap water on a daily basis should be
sufficient .
8 . Due to the powerful staining properties of the carotenoids that are found in many vegetables, especially
carrots, we suggest soaking stained parts overnight in any of these 4 cleaning solutions:
•
Biodegradable soap in enough warm water to cover mini juicer parts
•
1 part warm water to 1 part cider vinegar
•
1/2 small box baking soda in enough warm water to cover parts .
•
Warm water with 10% lemon juice solution .
CAUTION: Never use ammonia or abrasives .
• Lightly clean with a sponge or kitchen rag and liquid detergent after soaking .
WARNING: Never submerge the motor base in water or other liquid!
STORING INSTRUCTIONS
1 .
Unplug unit, assemble clean, dry parts before storing .
2 . Store the mini juicer in its box in a clean, dry place . Never store it while it is hot or still plugged in .
3 .
Store the food pusher in the feed tube of the lid .
4 . Never wrap cord tightly around the appliance . Do not put any stress on the cord where it enters the unit;
while holding the cord perpendicular to the unit, push inwards slowly to store it inside the base of the unit .
17822_BellaSoYummy_Target_MiniJuicer_IM_V6_R3.indd 7
17822_BellaSoYummy_Target_MiniJuicer_IM_V6_R3.indd 7
7
2023-10-05 4:02 PM
2023-10-05 4:02 PM
