Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
WARNING! Always make sure the mini juicer is unplugged before starting assembly .
IMPORTANT: The mini juicer is equipped with a safety system that prevents the juicer from being turned on
unless the unit is completely and properly assembled .
1 .
Open the safety locking bars so that they sit at both sides of the base
(see figure 2) .
2 . Place the juice pitcher under the juice bowl and place both so that the
juice bowl sits on top of the motor base (see figure 3) .
IMPORTANT: to avoid spillage, make sure the pulp basket sits flush up
against the base .
NOTE: to save cleaning time, line the pulp basket with a plastic grocery
store produce bag .
3 .
Add the blade basket on top of the juice bowl and push down lightly .
Position the clear cover on top of the juice bowl (see figure 4 and 5) .
CAUTION: Use care when handling the stainless steel blade basket .
Hold the basket's rim only . Do not touch the cutter blades on the bottom
of the basket . The cutter blades are very sharp!
4 . Lift the safety locking bars up and over the lid, push them down into place, locking the unit .
Make sure the lid is clamped securely into place (see figure 6) .
5 . Add food pusher inside of the feed tube (see figure 7) .
6 . Place juice pitcher under the spout (see figure 8) .
Figure 3
Figure 6
17822_BellaSoYummy_Target_MiniJuicer_IM_V6_R3.indd 5
17822_BellaSoYummy_Target_MiniJuicer_IM_V6_R3.indd 5
Figure 4
Figure 7
5
Figure 2
Figure 5
Figure 8
2023-10-05 4:02 PM
2023-10-05 4:02 PM
