LG STEAM WASHER Guía Del Usuario E Instrucciones De Instalacion página 33

TROUBLESHOOTING
BEFORE CALLING FOR SERVICE (cont.)
wrinkling • Washer not unloaded • Always remove items from the washer as soon as
promptly, the cycle is completed.
• Washer overloaded, • The washer can be fully loaded, but the drum should
not be tightly packed with items, The door
of the washer should close easily.
• Hot and cold water inlet • Hot water rinse can set wrinkles in garments.
hoses are reversed. Check the inlet hose connections.
Drum light does • This is normal. • The drum light shuts off automatically when the
not stay on washer starts, Press and hold the RINSE+SPIN
button for 3 seconds to turn on the light; it will turn
off automatically after 4 minutes.
Remote Laundry • Refer to the instruction • Refer to the instruction manual for the Remote
Monitor (optional manual for the Remote Laundry Monitor.
accessory) not Laundry Monitor.
working properly
The display shows: • Load is too small. • Add 1 or 2 similar items to help balance the load.
• Load is out of balance. • Rearrange items to help balance the load.
• The washer has an imbalance
detection and correction
system. If individual heavy
articles are loaded (bath
mat, bath robe, etc.) and the
imbalance is too great, the
washer will make several
attempts to restart the spin
cycle. If an imbalance is still
detected, the washer will stop
and the error code will be
displayed.
The display shows: • Control error. • Unplug the washer and call for service,
D
The display shows: • Water level is too high due to • Close the water taps, unplug the washer, and call
a faulty water valve, for service.
The display shows: • The water level sensor is not • Close the water taps, unplug the washer, and call
working correctly, for service.
The display shows: • Thermal overload protection • Allow the washer to stand for 30 minutes to allow the
circuit in the motor has been motor to cool; then restart the cycle, If the LE error
t_ tripped, code still appears, unplug the washer and call for service.
The display shows: • A power failure has occurred. • Restart the cycle.
55