16
OPERATING INSTRUCTIONS & CARE AND CLEANING
Clean your air conditioner occasionally to
keep it looking new. Be sure to unplug the
unit before cleaning to prevent shock or fire
hazards.
Dust Filter Cleaning
The Dust filter should be checked at least
once a month to see if cleaning is necessary.
Trapped particles in the Dust filter can build
up and cause an accumulation of frost on the
cooling coils.
• Open the front panel.
• Grasp the Dust Filter in the center, and pull
up and out.
• Wash
the
Dust
dishwashing detergent and warm water.
Rinse Dust Filter thoroughly. Gently shake
excess water from the Dust Filter. Be sure
Dust
Filter
is
replacing.
• Instead of washing, you may vacuum the
Dust Filter clean.
NOTE: When replacing the Dust Filter after
cleaning, make sure the protruding tabs on
the filter are facing outward, as shown below.
Dust Filter
Filter
using
thoroughly
dry
Tab
Cleaning of Air Quality Sensor
We suggest cleaning your Air Quality Sensor
every 2 months. This suggestion is based on
continuous usage of your unit.
To clean the air quality sensor:
• Open the front panel.
• Open the Air Quality Sensor cover.
• Clean the lens, inlet and outlet, with a damp
cotton swab. Use a dry cotton swab to
remove any excess water from the sensor.
• Reinstall the cover and front panel after
cleaning.
liquid
before
1
PUREAIR
This unit has available space for use with a
PureAir
TM
types of PureAir
by scanning the QR code behind the air inlet
grille, by visiting Frigidaire.com, or by calling
Frigidaire
1-800-944-9044(US)
(Canada).
2
Inlet
FILTER (sold separately):
TM
Filters (sold separately). Di erent
Filters can be purchased
TM
Customer
Service
/
Outlet
Lens
Center
1-800-265-8352
