Idiomas disponibles
Idiomas disponibles
C ha r g i ng th e batter y
Before initial use or when the built-in battery is not charged, charge the device as follows:
1. First, connect the small plug on the cable of the mains adapter to the mains adapter port
of the hair clippers and then connect the mains adapter to an easily accessible, live power
socket.
2. During the charging process, the control LED indicates the current battery charge level.
3. The hair clippers can be used with a mains connection at any time regardless of the bat-
tery charge level.
Acc essories
• Blade
After each cleaning, apply a few drops of blade oil to the cutter block to maintain the free
movement of the cutter block.
• Cleaning Brush
Use the cleaning brush to remove any remaining hair from the cutter block.
• Comb attachment
The comb attachment is adjustable in 10 steps. This lets you pre-
set the remaining length of the cut hair between 1.5mm and 16mm.
To do this, proceed as follows:
1. Press and hold the locking mechanism of the comb attachment.
2. Slide the comb attachment to the desired remaining length and
release the locking mechanism.
The small arrow on the comb attachment points to the scale that
indicates the current length setting.
The hair clippers can also be used without the comb attachment.
To remove the comb attachment, press and hold the release mechanism and slide the comb
attachment up out of its guide until you can take it off.
When mounting the comb attachment, make sure it sits correctly in the guide. Slide it down
slowly until you hear it lock into place.
•
The hair clippers have a vacuum function that draws the cut hair in after cutting and col-
lects it in a hair reservoir.
•
Please note that how well the vacuum function works largely depends on the length of the
cut hair.
•
It works best with short stubble.
C utti ng Ha i r
The hair clippers can be used either in battery mode or with a mains adapter.
Take care when shaving areas of the body with thinner skin (for example, the armpits or
pubic area). There is a risk of injury.
The hair being cut must be dry.
Depending on the cutting angle, the cutting length may deviate from the cutting length
indicated.
E NGL I SH
10
IN IT IA L U SE
