SICK GL6V Instrucciones De Uso página 20

OPERATING INSTRUCTIONS
en
4 Mounting
5 Electrical installation
20 O P E R A T I N G I N S T R U C T I O N S | GL6V
21.7
(0.85)
21 (0.83)
1
Figure 1: Connection type: cable
Mounting holes M3
1
Optical axis, receiver
3
Optical axis, sender
4
Cable
5
LED indicator yellow: Status of received
6
light beam
LED indicator green: Supply voltage
7
active
Potentiometer: sensitivity adjustment
8
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
< 0.4 Nm
The sensors must be connected in a voltage-free state (U
tion must be observed, depending on the connection type:
– Male connector connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
tions have been established. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (Tables 2 and 3):
Q / Q = switching outputs
21.7
(0.85)
21
14.5 (0.57) (0.83)
3
1
4
5
6 7
8
Figure 2: Connection type: plug, M8
Mounting holes M3
1
Optical axis, receiver
3
Optical axis, sender
4
Connector, M8
5
LED indicator yellow: Status of received
6
light beam
LED indicator green: Supply voltage
7
active
Potentiometer: sensitivity adjustment
8
> 0 V) once all electrical connec‐
V
14.5
(0.57)
3
4
5
6 7
8
= 0 V). The following informa‐
V
8021851.1HTG/2022-11-11 | SICK
Subject to change without notice