Idiomas disponibles
Idiomas disponibles
and MF batteries (14-120AH)
• 24V COLD/AGM LED: Charging mode for 24V
batteries (14-120AH) below -20ºC and AGM (14-
120AH) batteries
• SUPPLY LED for 13.6V (5A): make the clamp
not connect anything, press on the MODE button
three seconds, the SUPPLY button will be light.
This mode applies a charge of 5A at 13,6V
• BOOST LED for 16V (1.5A): make the clamp con-
nect with the battery, press on the MODE button
three seconds, the BOOST button will be light.
This mode can repair some damaged batteries by
applying 1,5A. Useful also as maintenance mode.
CHARGE STEPS
Voltage
(V)
Step
Current
(A)
STEP 1: Diagnosis
Check the battery voltage to ensure that the battery
connections are good and that the battery is in a stable
condition before starting the charging process.
TECHNICAL SPECIFICATIONS
Maximum voltage:
• Input: 100-240VAC 50/60Hz
• Output: 14.4V/14.7VDC 7.2A
Charging voltage:
• Normal 12V batteries: 14.4V
• Normal 24V batteries: 28.8V
• 12V AGM or cold batteries: 14.7V
• Cold batteries or 24V AGM: 29.4V
Maximum power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150W
Starting voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16.5V
Maximum load current 12v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2A
Maximum load current 24v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6A
Working temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 ~
Compatible with 12/24V lead acid batteries . . . . . . . . . . . . . . . . . . . . . . . . Wet, GEL, MF and AGM
Load type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-step automatic mode
Length of the power input cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8m
Length of current output cable (with clamps). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m
FR
GUIDE D'UTILISATION
DESCRIPTION DU PRODUIT
Cet appareil est idéal pour charger rapidement la bat-
terie de votre voiture. L'appareil a une taille compacte,
facile à utiliser et à stocker. La puissance du chargeur
est de 150 W, ce qui assure une charge rapide de la
batterie.
STEP 2: Recovery
It initiates the recovery process, if necessary, for dee-
ply discharged or sulphated (desolation) batteries by
pulsing small amounts of current.
STEP 3: Soft Start
The bulk loading process begins with a soft load.
STEPS 4-5: Bulk
The bulk charge process continues to use both a high
and medium rate charge and returns 80% of the ba-
ttery capacity, indicated by the 25%, 50% and 75%
charge LEDs.
STEP 6: Absorption
By bringing the charge level to 90%, the battery char-
ger will deliver small amounts of current to provide a
safe and efficient charge and limit battery gas.
STEP 7: Dripping
The battery is fully charged and ready for use, which
indicates that the 100% charge LED is solid green. If
the battery indicates on charge that more current is
needed, the battery charger will go into maintenance.
STEP 8: Maintenance
Continuously monitors the battery voltage to determi-
ne if a maintenance charge should be initiated. If the
terminal voltage drops below 12V and 24V, the char-
ger will start the maintenance cycle until the voltage
reaches 12V and 24V and then interrupt the charge
cycle. The cycle between trickle and maintenance is
repeated indefinitely to keep the battery fully charged
without overcharging.
CONSIGNES DE SÉCURITÉ
ATTENTION : Veuillez lire toutes les consignes
avant d'utiliser l'appareil. Un entretien régulier de
l'appareil est essentiel pour prolonger la durée de vie
de l'appareil.
• N'utilisez pas l'appareil à d'autres fins que de
charger la batterie.
· 4 ·
REF. 53929
40°C
