cecotec BOLERO WASH&DRY 10680 INVERTER B Manual De Instrucciones página 152

ENGLISH
Overfilling of water during
operation of the wash cycle
Too much foam in the drum
or foam overflows from the
detergent dispenser.
The high-speed spin must
be repeated many times
(spinning).
Machine does not spin
The machine vibrates a lot
during the spin cycle
Spinning result is not optimal
152 BOLERO WASH&DRY 10680 INVERTER B / STEEL B
If the water level drops, the machine will automatically
recover the water.
When the amount of laundry to be washed is too large, the
appliance can automatically fill the water several times during
the operation of the wash cycle.
The detergent is not suitable for machine washing (must show
the text "for washing machines" or "hand and machine wash"
or similar).
Too much detergent was used; less detergent is required in
soft water.
Due to different types and materials of laundry, the load
balancing system of the appliance may wobble and scatter
the laundry many times to extend the spin time. This is a
normal phenomenon, not an incidence of the machine.
No spin speed has been selected. The control panel displays
"—"
The legs have not been adjusted, causing the machine to rock.
New installation: the transport screws, including the plastic
spacer, or the polystyrene packaging, has not been removed
when installing the machine.
The appliance is trapped between furniture and/or walls.
The load is slightly unbalanced, and the device is rotating, but
at a slower speed.
When you wash less laundry, such as a pair of jeans, a jumper,
a bath towel, etc., the machine may not complete the spin
process due to balance protection.
If the load is slightly unbalanced, the appliance will spin, but at
a lower speed, not at the cycle's default spin speed or the spin
speed setting for the cycle.