Troubleshooting - KitchenBrothers KB4020 Manual De Instrucciones

started, remove the grates and place the full, thin pan directly on the heating
plates. Half fill the pan with water, fruit juice or other flavored liquids. Replace the
grates and place the food on them.
• Rotisseries, grill baskets, vertical poultry holders and other accessories enhance
your cooking experience, reduce cooking time and help with cleanup.

4. TROUBLESHOOTING

Problem
The burner does not
ignite with the ignition
button.
48
Cause
There is little to no gas
supply.
The ignition button is not
pressed properly.
The ignition button is not
working properly.
The wires or electrode
is covered with cooking
residue.
The electrode and
burners are wet.
The electrode is cracked
or broken (sparks at the
crack).
The ignition cable is
loose or disconnected.
The cable is shorting
(sparks between igniter
and electrode).
Solution
Check that the gas
cylinder is empty. If it is
empty, replace or refill it.
Press the ignition button
repeatedly until the flame
ignites.
Follow the steps at 3.4
for manual ignition.
Clean the wire and/or
electrode with alcohol.
Wipe the electrode and
burners dry with a cloth.
Replace the electrode.
Repair or replace the
cable.
Replace the igniter
cable/electrode.