Before Use; How To Use - KitchenBrothers KB4020 Manual De Instrucciones

5. Repeat the test.
6. If bubbles form again, stop trying; contact your local salesperson for assistance.
ATTENTION!
◊ NEVER use an open flame to check for leaks.
◊ Perform a gas leak test annually and whenever the mesh bottle is removed or
replaced.
◊ Always make sure the gas cylinder is properly connected to prevent fire and
explosion hazards.
◊ Do not place the gas cylinder in the storage compartment under the grill. Place
the gas cylinder as far as possible from the burners when they are on.

3.5 Before use

• Before proceeding, check that you have assembled the product correctly
according to the instructions.
• Use the product at least 1 meter away from a wall or surface.
• Never use the product in a building, garage, shed, drafty porch or other enclosed
area.
• Never obstruct ventilation around the product enclosure.
• Inspect the gas supply hose before turning on the gas.
• If there are signs of cut, wear or abrasion, replace the hose before use.
• Check for leaks before use.
• Do not use the product if a gas smell is present.

3.6 How to use

To prevent food from sticking to the grill, apply a thin layer of cooking or vegetable
oil with a long-handled brush before each preparation.
1. Open the lid.
2. Make sure all burner knobs are in the off position.
3. Connect the gas cylinder to the gas hose. Tighten it securely so that no gas can
escape.
4. Open the gas cylinder.
5. Turn the desired burner knob(s) open counterclockwise and press the ignition
button repeatedly until the burner flame is on.
• NOTE: If the burner flame does not come on within 5 seconds, turn the
burner knob to the off position and wait at least 5 minutes before trying again.
Otherwise, you risk a stabbing flame from the escaping gas.
6. Adjust the flame by turning the burner knob.
7. Place the food on the grill rack.
8. When you have finished cooking the food, turn the burner knob closed.
46