Idiomas disponibles
Idiomas disponibles
Unfastening operation
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may dam-
age the tool.
The tool allows you to change the direction of driver bit
rotation with ease, either towards the right (clockwise)
to tighten a screw or towards the left (counterclockwise)
to loosen a screw.
1.
Depress the reversing switch lever from the B side
for counterclockwise rotation.
► Fig.25: 1. Reversing switch lever
2.
Press and hold the release buttons on each side
of the casing, and then pull the casing apart.
► Fig.26: 1. Release buttons 2. Casing
3.
Place the tip of the driver bit into the head of the
screw to be loosened.
4.
Hold the tool firmly against the screw and squeeze
the switch trigger to start.
► Fig.27: 1. Driver bit 2. Screw head 3. Switch trigger
5.
Reset the casing back onto the gear housing until
it locks in place after finishing operation.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
After use
Wipe off the tool using a dry cloth or cloth slightly moist-
ened with soapy water at regular intervals.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Drywall screw strip
•
Phillips bit
•
Square bit
•
Pozidriv bit
•
Casing
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
12 ENGLISH
