Idiomas disponibles
Idiomas disponibles
11. CARE/HANDLING OF THE MEDIA AND RIBBON
11. CARE/HANDLING OF THE MEDIA AND RIBBON
CAUTION:
Be sure to read carefully and understand the Supply Manual. Use only media and ribbon
which meet specified requirements. Use of non-specified media and ribbon may shorten the
head life and result in problems with bar code readability or print quality. All media and ribbon
should be handled with care to avoid any damage to the media, ribbon or printer. Read the
following guideline carefully.
•
Do not store the media and ribbon for longer than the manufactures recommended shelf life.
•
Store media rolls on the flat end, do not store them on the curved sides as this might flatten that side
causing erratic media advance and poor print quality.
•
Store the media in plastic bags and always reseal after opening. Unprotected media can get dirty
and the extra abrasion from the dust and dirt particles will shorten the print head life.
•
Store the media and ribbon in a cool, dry place. Avoid areas where they would be exposed to direct
sunlight, high temperature, high humidity, dust or gas.
•
The thermal paper used for direct thermal printing must not have the specifications which exceed
+
Na
800 ppm, K
•
Some ink used on pre-printed labels may contain ingredients which shorten the print head's product
life. Do not use labels pre-printed with ink which contain hard substances such as carbonic calcium
(CaCO
) and kaolin (Al
3
For further information please contact your local distributor or your media and ribbon manufacturer.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
+
-
250 ppm and CL
500 ppm.
O
, 2SiO
, 2H
O).
2
3
2
2
11. CARE/HANDLING OF THE MEDIA AND RIBBON
E11-1
ENGLISH VERSION EO1-33016
Capítulos
