Quicklok™ System Battery Replacement - John Bean T 7700 Manual Del Operador

98
6.0-5
Operations
6.1 Wi-Fi quickLOK™ system bat-
tery replacement
To replace the internal battery in the quickLOK™ device
proceed as follows.
Figure 6.0-5
1. Switch off the machine.
2. Unscrew the plastic cap from the clamping
shaft.
3. Take a small fl at screwdriver to lift the battery
and remove it from its slot.
4. Take the new battery - Lithium Coin Battery
(CR2032 / 3.0V – 220/240mAh) - and slide it into the
board slot with the sign "+" upward.
5. Tighten again the plastic cap to the clamping
shaft quickLOK™.
6. Turn on the machine and check if it works fi ne
again.
....... .......
-