Idiomas disponibles
Idiomas disponibles
plete delivery, please contact your dealer.
• Clean the appliance.
Warning: Do not place any part of this appliance in a dishwasher.
• Danger of injury: Handle the blade with care as it is very sharp.
• Place the appliance on a dry, flat, and steady surface.
• Apply downward pressure onto the appliance so that the suction feet get a good grip.
HOW TO USE
Before plugging in the appliance, make sure:
• The electrical circuit is not overloaded with other appliances.
• The blade is properly engaged and tightened.
• The on/off switch is set to 0 (off position).
• The thickness knob is set to 0.
Do not slice:
• Hardly frozen foods
• Meat with bones
• Food containing large stones or seeds
• Food in wrappers such as aluminium foil or plastic film
Making preparation:
• Pull the food guide backward, as far as it can slide.
• Place the food to be sliced on the sliding feed table. Afterwards, put the food holder onto the
food guide handle and adjust it until it holds the food in place firmly.
• Place a collection tray (not provided) behind the blade to catch the slices.
• Turn the thickness knob to desired slice thickness (1 - 22 mm).
Getting started:
• Connect the power plug to a suitable electrical outlet.
• Set the on/off switch to I (on position) to switch on the appliance. The blade starts running.
• Grasp the food holder with your right hand while keeping your thumb protected behind the
food guide. Apply even pressure for best slicing results.
• Slide the food guide towards the blade. Move back and forth steadily with even pressure.
Repeat for additional slices.
• After use, set the on/off switch to 0 (off position) and the thickness knob to 0.
• Allow the blade to stop running completely. Unplug the appliance afterwards.
• Release the on/off switch and it automatically returns to position O.
Warning:
• Do not operate this appliance without the food guide and food holder in place.
• Do not operate the appliance continuously for more than 7 minutes. Allow the appliance to
cool down for 30 minutes before operating it again.
E NGLI SH
9
