Idiomas disponibles
Idiomas disponibles
INSTALLING/REMOVING POWER CORD
See Figure 4, page 9.
„ Place the speed switch in the OFF ( 0 ) position.
„ Insert the female end of the power cord into the product
as shown.
„ Connect the male end of the power cord to the power
source.
„ Make sure the power cord is secured before beginning
operation.
STARTING/STOPPING THE PORTABLE FAN
See Figure 5, page 9.
WARNING:
Hybrid tools are always in operating condition. Therefore,
switch should always be in the OFF ( 0 ) position, when
not in use.
„ Connect the fan to an AC or DC power supply.
„ To start the fan, turn the speed switch clockwise and
select the desired speed.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
„ The speed switch has four settings:
0 - Off
3 - High
2 - Medium
1 - Low
„ To stop the fan, turn the speed switch counterclockwise
to the OFF ( 0 ) position.
ADJUSTABLE HEAD
See Figure 6, page 9.
To change the angle of the fan head, loosen the adjustment
knob. Select the desired position and tighten the knob to
secure.
NOTICE:
Adjusting the fan head without loosening the adjustment
knob could result in damage to the fan.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 – English
