KitchenAid 5KSMPRA Manual Del Propietário página 6

Ocultar thumbs Ver también para 5KSMPRA:
PRODUCT DISASSEMBLY
DISASSEMBLING THE PASTA ROLLER AND CUTTERS
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
Remove the Pasta Roller or Cutter from the Stand Mixer.
IMPORTANT: After removing the Pasta Roller or Cutter from the Stand Mixer, be sure to
clean any dried dough. See "Care and Cleaning" for details.
3.
After finishing with the Pasta Roller and Cutters, replace the hub cover and tighten the
Attachment Knob on the Stand Mixer.
NOTE: Allow Stand Mixer to rest for at least 1 hour after extruding 2 consecutive pasta
dough recipes.
CARE AND CLEANING
CLEANING THE PASTA ROLLER AND CUTTERS
These accessories are designed to be used with pasta dough only. To avoid damaging your
Pasta Roller and Cutters, do not insert anything other than pasta dough.
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
IMPORTANT: Do not use metal objects to clean out the Pasta Roller and Cutters. Do not wash
the Pasta Roller and Cutters in the dishwasher, or immerse in water or other liquids. The Pasta
Roller and Cutters should be hand washed.
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
Completely disassemble Pasta Roller and Cutters. Use the directions from the
"Disassembling the Pasta Roller and Cutters" section.
3.
After cutting pasta, let Pasta Roller and Cutters air dry for one hour, then remove any dried
dough using a Cleaning Brush. If dried dough is difficult to remove, try tapping the
Attachment with your hand. Use a toothpick if necessary.
NOTE: Never use a knife or any other sharp object to remove excess dough. Do not run a dish
towel or any other cloth through the Rollers to clean them.
4.
After cleaning out all remaining dried dough, polish the Pasta Roller and Cutters with a
soft, dry cloth and store in a dry place at room temperature. Do not wash the Pasta Roller
and Cutters in the dishwasher.
ELECTRICAL EQUIPMENT WASTE DISPOSAL
DISPOSAL OF PACKING MATERIAL
The packing material is recyclable and is marked with the recycle symbol
of the packing must therefore be disposed of responsibly and in full compliance with local
authority regulations governing waste disposal.
RECYCLING THE PRODUCT
-
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
6
. The various parts
loading

Este manual también es adecuado para:

5ksmpsa5ksmpca