Accessories Installation - Astralpool APH3 INVERBOOST 68837 Manual Del Usuario

4.3 Accessories Installation

4. Accessories
4. 4. Accessories Accessories
- 16 -
and options
and and options options
Draining plug
1. Install the draining plug under
the bottom panel
2. Connect with a water pipe to
drain out the water.
Note: Lift the heat pump to install
the draining plug. Never overturn
the heat pump, it could damage
the compressor.
You have to put the drain pipes
with silicone or liquid Teflon to
avoid leaks.
Water Inlet & outlet junction
1. Install the two joints like the
picture shows
2. Screw them onto the water Inlet
& outlet connection
Mains cable wiring
1. Open the cover of the terminal
box (marked red) on the side of
machine
2. Tight the cables in the correct
connections, L N E, inside the
terminal block.
Filtration
contact)
1. Open the cover of the terminal
box (marked red) on the side of
machine
2. Tight the cables in the correct
connections,
terminal block.
pump wiring (Dry
1 2, inside the