HTW -VM-35FT Manual De Usuario página 12

USER MANUAL
FUNCTIONS OF OPERATION PANEL
CONTROLLING SPEED
Speed is controlled by the button switch.
0= OFF 1= Low
To turn the fan on, press the desired button switch.
1= Low 2= Medium
OSCILLATION CONTROL
To make the fan oscillate, push down on the oscillation knob located on the top of the motor housing. To
stop the fan from oscillating, pull up on the oscillation knob when the fan is in the desired position.
TILT CONTROL
The airflow can be adjusted upward or downward by tilting the fan head as desired.
• UNPLUG the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• Remove the Front Grille.
• Unscrew the Spinner (blade knob) by turning it CLOCKWISE (REVERSE THREAD).
• Pull the Fan Blade away from the Motor Housing.
• Gently wipe the Fan Blade and Grilles with a damp cloth.
• Re-assemble the fan by following the last three steps in ASSEMBLY OF BLADE AND GRILLE.
12

2= Medium 3= High
3= High
TABLE FAN HTW-VM-35FT