E trigger
F handle
G display
H batteries
I battery chargers
J blade protection
K Socket wrench
L ON / OFF switch
3.1.1 Intended use
This machine is designed and built for the
exclusive pruning of branches:
– prune and cut,
– cut bushes,
– be used by a single operator.
3.1.2 Improper use
Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use, but are not limited to:
– carving works;
– carry out butchery work;
– use the tool for cutting materials other than
wood (plastic materials, building materials);
– use the tool in more than one person
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer
from all liability, and the user will consequently be
liable for all and any damage or injury to himself
or others.
3.1.3 User types
This machine is intended for use by consumers,
that is, non-professional operators. It is intended
for "hobby use".
3.2 SAFETY SIGNS
The machine has various symbols on it
(fig. 2). They are used to remind the operator of
the behaviour to follow to use it with the necessary
attention and caution.
Meaning of symbols:
Danger! The failure to use
this machine correctly can be
hazardous for oneself and others.
Danger! Danger of severing
or serious injury.
Warning! Read the instructions
before operating the machine.
Warning! Wear ear
protectors, safety goggles
and a protective helmet.
Warning! Wear gloves and
non-skid safety boots!
Danger! Do not leave the machine
in the rain or in damp conditions.
Warning! For battery and battery
charger see the dedicated manual
IMPORTANT Any damaged or illegible decals
must be replaced. Order replacement decals from
an authorised service centre.
3.3 IDENTIFICATION LABEL
The identification label holds the following data
(fig. 1):
1.
Name and address of the manufacturer
2.
Conformity mark
3.
Month / Year of manufacture
4.
Type of machine
5.
Powervoltage
6.
Nominal power
7.
Serial number
8.
Article code
9.
Double insulation
Write the identification data of the machine in the
specific space on the label on the back of the
cover page.
IMPORTANT Quote the information on the
product identification label whenever you contact
an authorised service centre.
4. UNPACKING (Fig. 2)
1.
Open the packaging carefully, taking care
not to lose components.
2.
See the documentation included in the box,
including these instructions.
3.
Remove the tool from the box.
4.
Dispose of the box and packaging in
compliance with local regulations.
EN - 5
