TIME AND DATE SETTING
1. Press and hold the
flash, use
Note: The DST function corresponds to daylight saving time, +1 hour if activated.
2. Press
(E) button to confirm your setting, the year starts to flash, use
button or
3. Press
(E) button to confirm your setting, the month display starts to flash,
use
(C) button or
4. Press
(E) button to confirm your setting, the date display starts to flash, use
(C) button or
5. Press
(E) button to confirm your setting, the 12/24-hour mode display
starts to flash, use
mode;
6. Press
(E) button to confirm your setting, the hour display starts to flash, use
(C) button or
7. Press
(E) button to confirm your setting, the minute display starts to flash,
use
(C) button or
8. Press
(E) button (or no key for 10 seconds) so exit and save the setting.
In setting mode, press SNZ/LIGHT button exit the setting mode return to time
mode.
ALARM SETTING MODE
In normal mode, press
To set the alarm:
1. In normal mode, press and hold
D
E
starts to flash;
2. Use the
B
C
D
3. Press
(D) button to confirm your setting, the minute display starts to flash;
4. Use the
5. Press
(D) button (or no key for 10 seconds) so exit and save the setting.
In setting mode, press SNZ/LIGHT button exit the setting mode return to time
mode.
ALARM AND SNOOZE
- While the alarm is beeping, the alarm icon will flash. It will stop automatically
after 2 minutes.
- While the alarm is beeping, press the "SNZ/LIGHT" to active snooze 5 minutes.
7
6
7
(E) button for 3 seconds, the DST ON/OFF icon start to
(C) button or
(B) button to set the correct year. The default year is 2022;
(B) button to set the correct month;
(B) button to set the correct date;
(C) button or
(B) button to set the correct hour;
(B) button to set the correct minute;
1
(D) button to turn on/off.
1
2
3
2
(C) button or
(B) button to set the required hour;
E
4
3
(C) button or
(B) button to set the required minute;
4
5
(B) button to turn on/off;
(B) button to set the correct 12/24 hour
1
2
1
3
2
4
3
4
(D) button for 3s until Alarm Time hour
5
5
EC 886
(C)
_11