Indesit IB55 732 W Manual Del Usuario página 17

Idiomas disponibles

Idiomas disponibles

7 Operating the Product
Read the "Safety Instructions" sec-
tion first!
• Do not use any mechanical tools or any
other tools than the recommendations of
the manufacturer to speed up the defrost
operation.
• Do not use parts of your refrigerator such
as the door or drawers as a support or a
step. This may cause the product to trip
over or its components to be damaged.
• The product shall be used for storing
food only.
8 Use of Your Appliance
8.1 Control Panel of the Product
The operating temperature is set by the
temperature control.
0=System cooling off
1=Lowest cooling setting (Warmest set-
ting)
5=Highest cooling setting (Coldest setting)
The average temperature inside the cooler
compartment should be around +4°C.
Please select a setting based on the de-
sired temperature.
• Turn off the water valve if you will be
away from home (e.g. at vacation) and
you will not be using the Icematic or the
water dispenser for a long period of time.
Otherwise, water leaks may occur.
Unplugging the Product
• If you are not going to use the product for
a long time, unplug the product from the
socket.
• Remove the food to prevent odours,
• Wait for the ice to melt, clean the interior
and let it dry, leave the doors open to
avoid damaging the inner body plastics.
Please note that there will be different tem-
peratures in the cooling area.
The coldest zone is just above the crisper.
The interior temperature also depends on
the ambient temperature, how often the
door is opened, and the amount of food
stored in the refrigerator.
Frequent opening of the door causes the in-
ternal temperature to rise.
It is therefore recommended that you close
the door as soon as possible after opening
it for any reason.
The internal temperature of your refriger-
ator can change due to the following reas-
ons:  
• Seasonal temperatures;
• Opening the door frequently and leaving
it open for a long time;
• Placing foods in the refrigerator without
waiting for them to reach room temperat-
ure;
• The location of the refrigerator in the
room (e.g. exposure to sunlight).
You can adjust the varying internal temper-
ature due to such reasons using the ther-
mostat.
The MIN set is defined as the Winter Set-
ting for use at ambient temperatures
EN / 17
EN
FR
ES
loading

Este manual también es adecuado para:

Ib55 732 x