Idiomas disponibles
Idiomas disponibles
Power Supply
Remote Control (csp-£s777 only)
Insert two R6 (size AA) batteries.
|
ee:
A
cee
<> > SS
R6 (AA
The © STANDBY OPE/BATT indicator lights up while electric ~~ when the reach of the remote control signal is less than 5
current flows to the unit.
meters (16 feet), replace the batteries.
The remote conirol may not operate correctly when:
;
- The unit is exposed to intense light, such as direct sunlight
Connect the AC cord as illustrated below.
- Objects block the remote contro! signal to the unit
To use the buttons on the remote conirol
Buttons on the remote control and the main unit with identical
indications have the same functions.
To turn the power on
Press POWER to turn on the display.
@ to the AC inlet of the unit
When using the unit on the batteries, this button will not turn
the power on.
supplied AC cord
fs
mp Oo
AG cute
To turn the power off
Press POWER to turn off the display.
:
CAUTION
When one of the deck operation buttons is pressed, this
Use only the supplied AC cord. Use with other cords may
button will not turn the power off.
result in the risk of fire.
;
Dn
i
To use the FUNCTION button
E
os
a
ie
Each time FUNCTION is pressed while the power is on, the
:
" =
function is selected cyclically.
Open the id of the battery sornnarvieti on the rear and
.
insert eight R14 (size C) batteries, not supplied, with the
[ ; GD St
RADIO =?
STARE
and @ marks correctly aligned. Then close the lid.
To switch from AC power supply to battery power
* applicable when one of the deck operation buttons is
supply, disconnect the AC cord from the AC inlet.
pressed
qi
When to replace the batteries
The ®& STANDBY OPE/BATT indicator becomes dim, the
tape speed slows down, volume decreases, or sound is
POWER
distorted during operation.
Notes on batteries
* Do not mix different types of batteries or old batteries with
new ones.
* When the unit is not to be used for a long period, remove
the batteries to prevent neediess battery wear.
« Never recharge the batteries, apply heat to them or take
them apart.
« Remove dead batteries.
If liquid leaks from the batteries, wipe thoroughly to remove.
ENGLISH 3
