Idiomas disponibles
Idiomas disponibles
d
b
e
f
g
h
i
1.2-1
Safety
c
a
1.1.1 Label of the manufacturer
A marking label attached to the machine shows the
following data Fig. 1.2-1:
a- Name and address of the manufacturer
b- EC compliance marking
c- Year of manufacture
d- Model
e- Serial number
f- Weight
g- Electric specifications (volt, ph, Hz, kW and A)
h- Air pressure required
i- Acoustic pressure
1.2
Areas with danger of crushing
Every Danger and Warning symbol in the Danger Plate
is to be considered as referring to different elements
or areas of the equipment.
The image to the side highlights the specific areas of
the equipment where dangers of crushing are present.
KEEP HANDS AND FEET AT A SAFETY DISTANCE
DURING THE OPERATION OF ALL PARTS INDICATED
ON THE PLATE OF CRUSHING DANGER (SEE
FIGURE ON THE SIDE).
1.2.1 SAFETY DEVICES
This machine has several protectors made of plastic
to prevent compression or crushing hazards.
The rotation speed of the wheel support plate has been
limited to prevent dragging or entrapping hazards.
There is an inflation pressure limiting device to prevent
explosion hazard due to tire over-inflation.
EN -
11
