Festool ROTEX RO 90 DX FEQ Manual De Instrucciones página 11

Triangular sanding and pad change - Fig. [4]
3
This position is used for sanding with the
delta sanding pad and slat sanding pad;
the rotary motion is blocked.
You can change the sanding pad in this
position.
 The stop rod [1-8] blocks the installation of the
sanding pad in the change-over switch positions
ROTEX rotary motion and eccentric motion.
Changing sanding/polishing pad - Fig. [5]
 Only use sanding and polishing pads that are
suitable for the maximum speed specified.
3
Tuned to the surface being processed, the machine
can be equipped with two sanding pads of different
hardnesses.
Hard: Coarse and fine sanding on surfaces. Sand-
ing edges.
Soft: Universal for coarse and fine sanding, for flat
and convex surfaces.
When the interface pad [1-12] is fitted on the sand-
ing pad, strength is reduced = extra soft.

Following the sanding pad change, switch the
change-over switch [1-2] to the desired sanding
motion.
11