Idiomas disponibles
Idiomas disponibles
The device can be switched on by pressing
the ON/OFF control
When the device is connected to
the power supply, the travel lock is
automatically deactivated so that
the device can be used in mains
operation right away.
7. USAGE
1. Place the stainless steel blade
device from above until it clicks into place.
To remove the stainless steel blade
again, press it upwards with your thumb.
2. If necessary, select one of the six comb at-
tachments
2
steel blade
. Slide the comb attachment
1
as far as it will go along the stainless
2
steel blade
1
start with the comb
attachment with the
longest cutting length
initially so you can
then slowly work your
way up to your desired
100.58_MN5X_2023-07-24_01_remove-attachment_BEU
length.
3. Press the ON/OFF control
the device. The LED display
light up.
4. Guide the device slowly through the hair.
Ensure that the comb attachment sits as
flat on the head as possible. Always only
trim small areas. Cut the hair against the
direction of growth. If the hair grows in dif-
ferent directions, use the device in multiple
directions.
5. To switch off the device after use, press
the ON/OFF control
turns off.
5
again.
4
onto the
1
and place it on the stainless
. We recommend that you
to switch on
4
begins to
5
100.58_MN5X_2023-07-24_01_put-on-comb_BEU
. The LED display
4
8. CLEANING AND
MAINTENANCE
8.1 Cleaning the device
WARNING
• Risk of electric shock! Always disconnect
the device from the power source before
cleaning it.
• Risk of fire! Do not clean the device with
highly flammable liquids!
• Do not clean the device in the dishwash-
1
er!
• The device is not waterproof. The stain-
less steel blade
rinsed under running water for hygienic
cleaning.
1. For thorough cleaning, remove the stain-
less steel blade
ing it upwards.
2. Leave the stainless steel blade
completely before reattaching it to the de-
vice.
8.2 Oiling the stainless steel
blade
To achieve consistently optimal cutting re-
sults, spread a little cutting oil on the stainless
steel blade
9. ACCESSORIES AND
REPLACEMENT PARTS
To purchase accessories and replacement
parts, please visit www.beurer.com or contact
the corresponding service address (according
to the service address list) in your country.
Accessories and replacement parts are also
available from retailers.
19
can be removed and
1
from the device by pull-
1
on a regular basis.
1
to dry
1
