Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Manual Del Usuario página 12

12 V-TONE ACOUSTIC DRIVER DI ADI21
(1)
(3)
(8)
Thank you for showing your confidence in us by purchasing the V-TONE
ACOUSTIC ADI21. This high-quality acoustic guitar driver is designed
for all acoustic guitar players who are looking for more sounds to reach
maximum flexibility and creativity. Thanks to its high-performance
EQ section (including parametric mids) and the integrated Tube/
Microphone Emulation, the ADI21 gives your guitar natural sound with
smooth saturation, just as if it were being miked. In addition, the ADI21
functions as a standard ultra-transparent direct injection box when used
in bypass mode.
A DI (Direct Injection) box allows you to send a signal directly from an
unbalanced, high-impedance output (like an electric guitar) and connect it
directly to the balanced mic input of a mixing console.
Whether for stage, recording, rehearsal or warm-up, Behringer's V-TONE
ACOUSTIC ADI21 is a natural choice for those who are seeking great tone
with a simple set-up.
1. Control Elements
Control elements
The TREBLE control governs the high-frequency range of the signal
(1)
±
( 12 dB).
The BASS control allows you to boost/cut the low-frequency range
(2)
±
( 12 dB).
Use the MID control to boost or cut the mid-range frequencies
(3)
±
12 dB). The MID FREQ control lets you select the middle
(
frequency (170 Hz to 3.5 kHz) that will be boost/cut.
The LEVEL control adjusts the output level of the ADI21.
(4)
The BLEND control activates the integrated tube/microphone
(5)
emulation circuitry. In most cases, you will probably set it to
maximum (100%). If you want to hear some of the distinct
timbre of a piezo pickup or reduce the amount of compression,
simply turn the control counterclockwise.
When activated, the GND LIFT disconnects the ground connection
(6)
between input and output. Depending on the grounding of the
connected equipment, this can eliminate hum or ground loops.
(2)
(4)
(9)
(5)
(6)
(7)