Erreka HERA Manual Técnico De Instalación página 12

Automatismo para puertas de garaje basculantes de contrapeso
Idiomas disponibles

Idiomas disponibles

EXAMPLE AUTOMATION TWO MOTORS WITH LATERAL INSTALLATION
INSTALLATION OF THE LATERAL FIXING PLATES
Place the fixing plates L motor support to the door as illustrated.
L1
M1
Place and fix the motors on the fixing plates so that they are in line with the broaching
arms at a distance between 50 and 100 mm downwards by taking as reference the
attachment pin of the existing arm (fig 2). Insert the broaching arms (straight or
curved) on the motor shaft and lock it.
LIMIT SWITCH ADJUSTMENT
Close the door.
Ÿ Place the limit switch (C) in order
to touch the lever of the
microswitch of the closing limit
switch and tigthen the screw.
Open the door.
·
Ÿ Place the limit switch (C) in order
to touch the lever of the
microswitch of the opening limit
switch and tigthen the screw.
(See also the specifications of the
control panel)
MANUAL RELEASE
In case of lack of electric power, the
motor can be manually unlocked with the
lever by performing a rotation of about
90°. T o block bring back the release lever
to its original position.
Apply the external lock (OPTIONAL) to
unlock the motor from the outside in case
of power failure.
L2
M2
Microswitch
Limit switch C
Screw
EXAMPLE AUTOMATION WITH NON-PROJECTING DOOR
Place and securely fix the tube support to the door frame, at a distance of 110 mm
under the center of the door (look at fig. 7-8)
Door
The rotation axis of the
motor must be
110mm under the
center of the door
loading