Idiomas disponibles
Idiomas disponibles
Application
WARNING!
DANGER OF FIRE!
If you vacuum glowing ashes, burning cigarettes or similar with the vacuum cleaner,
the filters may catch fire.
Do not vacuum any glowing or smouldering materials or objects.
„
NOTE!
DANGER OF DAMAGE!
Improper handling of the appliance may cause damage.
Make sure that all parts are correctly inserted and undamaged before switching on
„
the appliance.
Do not vacuum sharp-edged particles.
„
Do not cover the ventilation openings during operation.
„
Check the floor for water resistance in an inconspicuous place before using the
„
appliance. Do not clean water-sensitive floors (e.g. unsealed cork floors), as they
could be damaged by water penetration.
Use
1. Step sideways on the floor brush with your foot and pull the handle towards you to release the anchorage (see Fig. G).
2. Press the On / Off switch
3. The appliance starts automatically in standard mode. You can select other modes by pressing the MODE button:
a. Press 1 x – BOOST
b. Press 2 x – Dry
4. Press the MODE button again to switch back to normal power.
5. If you place the running appliance in an upright position while engaging the catch on the floor brush, the appliance
switches to standby mode and switches off automatically after 3 minutes. During standby mode, the LEDS of the
On/Off switch and the mode switch light up. In standby mode, the appliance restarts as soon as it is brought into a
diagonal position.
TIP: There is a delay of 3 seconds when the appliance is switched off. Please do not repeat the process.
„
Instruction manual
to start the appliance.
GB
27
