All manuals and user guides at all-guides.com
OutdOOr 720P IP WIFI camera
C - iNSTALLATiON
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the camera's network activity LeD should flash.
Note: if you want to use your camera with WiFi but cannot use the ezLink function, set it up with a wired
connection so that you can then move to a wireless connection.
3 - INSERTING A MICRO SD CARD (NOT INCLUDED)
Your camera has a micro SD card slot, which gives it an internal storage memory. The maximum size is 32
GB.
WARNING: Inserting a micro SD card into the camera requires opening the camera. To prevent any marks
or scratches on the camera (inside face of the glass, lens, etc.), it is strongly recommended that you
disassemble it on a flat, clean and well-lit surface.
Remove the camera's 2 front screws using an Allen key.
Remove the 4 screws around the electronic card. Warning: do not remove the 4 inside screws.
10
en