Inserting A Micro Sd Card (Not Included) - THOMSON DSC 725S Manual De Instrucciones

OUTDOOR 1080P IP WIFI CAMERA
C - INSTALLATION
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the camera's network activity LED should flash.
• Click the icon then scan the QR code on the camera. If your camera is correctly connected to the
internet, it will be automatically added.
NOTE: If it is not added automatically and the application asks you to choose between LAN and WiFi, your
camera or smartphone is having problems accessing the internet. Check your camera's, smartphone's or
tablet's connection and Reset the camera by pressing for more than 15s on the Reset button.
Note: if you want to use your camera with WiFi but cannot use the EzLink function, set it up with a wired
connection so that you can then move to a wireless connection.

3 - INSERTING A MICRO SD CARD (NOT INCLUDED)

Your camera has a micro SD card slot, which gives it an internal storage memory. The maximum size is 64
GB.
WARNING: Inserting a micro SD card into the camera requires opening the camera. To prevent any
marks or scratches on the camera (inside face of the glass, lens, etc.), it is strongly recommended that you
u . e i t y u r e c n s s o m o t h w . w w
disassemble it on a flat, clean and well-lit surface.
Remove the camera's 2 front screws using an Allen key.
Remove the 4 screws around the electronic card. Warning: do not remove the 4 inside screws.
10
EN